How to Add More Color to Your Metal Jewelry

Published: 30th August 2009
Views: N/A




This is reasonably intriguing for someone that hasn't heard of systems in adding more colours to their metals and has just been doing beaded jewellery making. Actually, there are 3 common materials that may be bonded, fixed, or dripped onto metals to add more colours.
the first one is epoxy ; this is a low-tech material that you may use in your work. This is a cheap medium that will produce numerous results.
Resin and hardener are the two parts of the epoxy mix. It's simply a matter of time for it to cure and become a tough, sturdy, super glossy plastic substance that can be drilled, glued and sanded, when they are mixed. This equals fifty coats of polish and dries to a mirror finish. Here is where the color comes in, use acrylic paint, gouache, jelly powder, makeup powder, or anything more that will think about.
Try playing with epoxy on some of your jewellery designs. You can try layering, drip it into etched or stamped depressions on sterling or copper sheets, and pour it into bezels ; you can try dipping things into it also. Important reminder, you should suspend any dipped work while waiting for it to cure. Epoxy is glue ; you do not need to attach it to anything. Epoxy cures fast, epoxy that are available in hardware store usually comes in 5 and 10 minute varieties, and others are fast too, so be sure of your working time, only mix up as much as you may use in the five or ten minutes. Don't mix it with anything you ever need to use again, or just mix them up on a piece of scrap paper with a stick. And, don't breathe or touch epoxy with your bare skin before it cures. Epoxy can be unsafe to your well-being, always consider sensible precautions in working with this type of chemical.
Two-part epoxy is available from the ironmongers in little 2-sided syringes, and you can also find it in large two bottle kits from craft and hobby suppliers.
The second material you may use to add colours to your metal is the polymer clay. Polymer clay comes in a variety of colours. This is formed from PVC ( polyvinyl chloride ) and goes under diverse brand names, like Fimo, Sculpey, and Friendly Clay.
In coming up with metal with polymer clay, to make polymer clay jewelry, cut metal sheet elements to make mosaics, and then fill the pieces of sterling tubing with clay. You can try messing with liquid clays and colored powders that are available on the market.
However, polymer clay is made marginally different when it comes to quality from each manufacturer. So when using it, particularly when baking it is vital to first read the instructions. You also need to condition the polymer clay before using it. Exercise conditioning by kneading the clay with your hands, or running it thru a dedicated blender just make efforts to use dedicated tools.
the third material you may use is the enamel. Enameling is not like the two materials we've debated earlier. Enameling uses powdered glass or glass granules, and a torch and kiln. These are all required in making glass beads. We all know that glass beads can be very colorful, so you can add this to put more colours in your metalwork.
In this process, the glass is soft in thin layers onto a metal form, frequently on copper. The layers of melted glass are usually vibrant and do not fade or chip under ordinary conditions, but bending metal may cause cracks in enamel.
Explore enameling with the use of powdered glass from enameling providers and a butane torch. Enameling suppliers also sell copper blanks and also try enameling sterling silver etchings and stamping.
In working with these materials for these methods, always take care. Read and understand first all the instructions and cares to avoid accidents.





.

Report this article Ask About This Article


Loading...
More to Explore